Ultrasonic Cleaning System Crest EH700CR

A High-Capacity Ultrasonic Cleaning System at a Great Price

• Auto-sweep for thorough cleaning action
• Set timer to 30 minutes or continuous
• Set temperature ambient to 80°C
• 2-year warranty on parts and labor protects your investment
• Rugged 45 kHz ceramically enhanced industrial transducers

	Heater: Thermostatically adjustable heater.		Sweep frequency: Continuous slight variation of ultrasonic frequency to eliminate hot spots, dead zones, and standing waves.
	Drain: Drain with valve for easy removal of fluid from tank.

Auto repair, small engine repair, machine and custom-fabricating shops quickly learn the advantages of an ultrasonic cleaning system. For these and similar organizations the 7-gallon capacity Crest EH700CR ultrasonic cleaning system is not only desirable, it is a necessity to avoid time-consuming and laborious manual scrubbing using harsh solvents in parts washing tanks.

Ultrasonic cavitation created by the EH700CR 45 kHz transducers produce the billions of minute bubbles that implode on contact with all surfaces of parts immersed in the ultrasonic cleaning solution. These bubbles penetrate cracks and crevices impossible to reach by manual methods to quickly and safely strip away contaminants and other unwanted particles. Meanwhile you and your staff can attend to other business in the shop.

Develop your ultrasonic cleaning system routine

Biodegradable ultrasonic cleaning solution concentrates are available for virtually all cleaning and restoration tasks. With the formulations that match your needs you can quickly establish cleaning system routines. Here are some typical steps:

1. Prepare fresh solutions and add them to the ultrasonic cleaning tank fill line. Activate the unit for about 45 minutes to degas the solution by removing cavitation-inhibiting trapped air.
2. Set cleaning time and cleaning temperature controls according to what is being cleaned.
3. Place parts to be cleaned in the basket (available separately) taking care they do not contact each other. Lower them into the solution.
4. At the end of the cycle remove the parts and inspect. Proceed with follow-up steps.

Ultrasonic cleaning system maintenance tips

Skim off oils and other contaminants that rise to the surface of the ultra sonic cleaner and set them aside for proper disposal. When cleaning takes longer or solutions become discolored it’s time to replace them. Drain the tank and set the spent solution aside for disposal along with skimmings. Clean the tank according to the manufacturer’s instructions then fill it with fresh solution.

More Crest EH700CR ultrasonic cleaning system features and benefits

• Cavitation-resistant stainless steel tank for a long service life
• Stainless steel enclosure resist spills and will not crack
• 2-year warranty on parts and labor protects your investment
• 300 watts average sonic power provides efficient ultrasonic cleaning
• Side mounted drain control to ease solution replacement
• Lifetime heater warranty – protects against burnout
• Comes with tank and cover; optional accessories include basket and auxiliary pan

Questions? Contact the ultrasonic cleaning experts at iUltrasonic.

We’ll help you select the right sized ultrasonic cleaner, the correct biodegradable cleaning solution concentrates and cleaning procedures to get the highest productivity possible from your ultrasonic cleaner investment.