| Length: | Width: | Depth: | Volume: |
| 11.80 in. | 9.40 in. | 7.90 in. | 3.50 gal. |
Heater
|
Timer
|
Drain
|
Sweep
|
Heater: Thermostatically adjustable heater. |
Benefit: Improves cleaning effectiveness; required for removal of grease and oil. |
|
Drain: Drain with valve for easy removal of fluid from tank. |
Benefit: Simplifies maintenance. |
|
Degas Mode: Intermittent operation of ultrasonic power for rapid removal of entrained air from liquids. |
Benefit: Since cleaning does not start until air isremoved from cleaning fluid,this mode speeds up air removal and gets cleaning started faster. Also degasses solvents. |
|
Digital display: Displays operating parameters. |
Benefit: Enables quick and easy monitoring of process status and resetting of precise operating conditions. (See comment below*) |
|
Dual frequency: Can be switched between two different ultrasonic frequencies. |
Benefit: Accomplishes a broad range of different types of cleaning tasks. |
|
Safety auto-off: Ultrasonic power shuts off automatically after 12 hours of continuous operation. |
Benefit: Protects parts and prevents damage to machine if you forget to turn it off. |
|
Adjustable power: Ultrasonic power can be manually adjusted. |
Benefit: You can set the right power intensity for the specific cleaning task, from gentle to strong. |
|
Pulse mode: Produces intense bursts of ultrasonic power. |
Benefit: Removes stubborn contaminants. |
|
Sweep frequency: Continuous slight variation of ultrasonic frequency to eliminate hot spots, dead zones, and standing waves. |
Benefit: Provides uniform and thorough cleaning. Prevents damage to electronic components. |
|
Normal mode: Operates at fixed ultrasonic frequency. |
Benefit: Aids in mixing, dissolving, and dispersing samples. |
The PH350EL sonicator bath may well be the only unit you need to quickly and effectively handle the entire gamut of tasks that are performed by ultrasonic cleaners from iUltrasonic Although a single unit it can function as two or more separate cleaners because it operates at a user-controlled 37 kHz or 80 kHz frequency and can be set to automatically shift between the two at 30-second intervals. Position the job in the mesh basket (available separately) then select 37 kHz for cleaning difficult to remove contaminants and for mixing, dissolving, dispersing and degassing samples. At the quieter 80 kHz frequency, these aqueous parts washers gently clean delicate equipment including the interiors of small tubes and blind holes.
Check out the intuitive control panel of this 3.5-gallon ultrasonic cleaner. The temperature control engages the auto-start function when the set temperature is reached. The pulse control provides sharp spikes in ultrasonic power to blast away particularly reticent contaminants. Adjust the power control to match the durability of surfaces being cleaned. As you become more familiar with the PH350EL sonicator bath you'll find an increasing number of applications that contribute to your productivity.
We'll help you select the right sized ultrasonic equipment, the correct biodegradable solution concentrates and operating procedures to get the highest productivity possible from your ultrasonic cleaner investment.
