Large Ultrasonic Cleaners Elma X-tra basic 800

Large Ultrasonic Cleaners for Manufacturing Facilities

• Fully programmable cleaning cycles
• 18.5 gallon tanks hold large parts
• Clean at 25 or 45 kHz depending on the product
• Most powerful Pulse mode in the industry
• Permanent Sweep avoids potentially damaging hot spots
• Welded tank construction warranted for 3-years

	Sweep frequency: Continuous slight variation of ultrasonic frequency to eliminate hot spots, dead zones, and standing waves.		Heater: Thermostatically adjustable heater.
	LED display: Steady LED indicates set time and/or set temp. Flashing LED indicates remaining time and/or actual temp.		Safety auto-off: Ultrasonic power shuts off automatically after 12 hours of continuous operation.
	Drain: Drain with valve for easy removal of fluid from tank.		Dual frequency: Can be switched between two different ultrasonic frequencies.
	Pulse mode: Produces intense bursts of ultrasonic power. Use to remove stubborn contaminants or degas solution rapidly.

Industrial firms looking to upgrade their ultrasonic cleaning capabilities should take a close look at these large ultrasonic cleaners. It won’t take long to figure out that these units offer features that contribute immeasurably to faster throughput. That’s because they can be programmed to handle virtually any ultrasonic cleaning job coming down the production line. What does that mean? It simply means that the X-tra basic 800 can do what otherwise would require you to invest in multiple ultrasonic cleaner models instead of one.

A special feature is the easily accessed and removed unitized control and ultrasonic generator component. If servicing is required it can be swapped out with a spare so operations can continue.

Cycle programming with the Elma X-tra basic 800 large ultrasonic cleaners

The secret is the intuitive operating panel liberally equipped with LED displays that indicate exactly what is going on. In addition to the on-off button there’s one to set the ultrasonic frequency (25 or 45 kHz). Set and elapsed cleaning time is indicated in increments to 30 minutes with auto shut-off, or permanent to 12 hours. It also shows set and actual solution temperatures. The unit will auto start when the set solution temperature is reached with options from 30°to 80°C and there is an auto safety shut-off at 90°C. Or the unit can be started manually. Finally the pulse mode button can be activated for fast solution degassing or for blasts of added ultrasonic cleaning power.

With experience you and your team will soon develop standard operating procedures for cleaning virtually any product that comes through your production line.

Order the Elma X-tra basic 800 large ultrasonic cleaners and get:

• Precision German construction
• A welded cavitation-resistant AISI Type 316 stainless steel tank with a 3-year warranty
• Attractively styled easily cleaned Type 321 stainless steel housing
• Roller mounts for easy moving
• Handy basket fixtures for cleaning and draining
• Side-mounted ball valve drain
• Slanted tank floor for fast drainage
• Comes with tank and operations manual
• Optional baskets, stainless steel lid, hinged flip-top sound-deadening cover

Questions? Contact the ultrasonic cleaning experts at iUltrasonic.

We’ll help you select the right sized ultrasonic cleaner, the correct biodegradable solution concentrates and operating procedures to get the highest productivity possible from your ultrasonic cleaner investment.