Industrial Ultrasonic Cleaning Machine Elma X-tra basic 1600

Fully Programmable Industrial Ultrasonic Cleaning Machine

• Holds 35 gallons of solution
• Intense cleaning in powerful Pulse mode
• Choose 25 or 45 kHz frequency
• Permanent Sweep mode
• Easily serviced electronics
• Operator-controlled time and temperature

	Sweep frequency: Continuous slight variation of ultrasonic frequency to eliminate hot spots, dead zones, and standing waves.		Heater: Thermostatically adjustable heater.
	LED display: Steady LED indicates set time and/or set temp. Flashing LED indicates remaining time and/or actual temp.		Safety auto-off: Ultrasonic power shuts off automatically after 12 hours of continuous operation.
	Drain: Drain with valve for easy removal of fluid from tank.		Dual frequency: Can be switched between two different ultrasonic frequencies.
	Pulse mode: Produces intense bursts of ultrasonic power. Use to remove stubborn contaminants or degas solution rapidly.

A lot of consideration goes into selecting the best ultrasonic cleaners out there, but thankfully, the Elma X-tra basic 1600 makes the selection easy. Here is a heavy-duty unit that warrants a check mark next to every feature on your criteria list. That’s because it is the result of Elma’s 50 years of experience in designing and perfecting ultrasonic cleaning equipment aimed at improving cleaning efficiencies and throughput. Or, said differently, improving your productivity and profit-making potential.

Operating the X-tra basic 1600 industrial ultrasonic cleaning machine

What better way to describe how great this industrial ultrasonic cleaning machine is than to map out a typical operating cycle that you program using the intuitive control panel and its full range of LED displays.

1. Mix and add 35 gallons of ultrasonic cleaning solution to the stainless steel tank
2. Turn on the heater and activate the Pulse mode for 10 minutes to degas the solution
3. Place products in the mesh basket (available separately) and lower them into the solution
4. Set the cleaning cycle frequency, time and temperature. The unit will start when the temperature is reached and turn off at the end of the set time. Set and current values are indicated by LED displays. Safety shutoffs protect against excessive temperature (>90°C) or after 12 hours operation.
5. At the end of the cleaning cycle remove, rinse and inspect. Products are then ready for further processing.

If parts are particularly dirty or have tenacious deposits simply activate the Pulse mode for a blast of extra ultrasonic power.

With experience you’ll soon develop SOPs that speed the flow of products through your ultrasonic cleaning cycles.

More attributes of the X-tra basic 1600 industrial ultrasonic cleaning machine

• Precision German construction
• A welded cavitation-resistant AISI Type 316 stainless steel tank with a 3-year warranty
• Attractively styled easily cleaned Type 321 stainless steel housing
• Roller mounts for easy moving
• Handy basket fixtures for cleaning and draining
• Side-mounted ball valve drain
• Slanted tank floor for fast drainage
• Comes with tank and operations manual
• Optional baskets, stainless steel lid, hinged flip-top sound-deadening cover

Questions? Contact the ultrasonic cleaning experts at iUltrasonic.

We’ll help you select the right sized ultrasonic cleaner, the correct biodegradable solution concentrates and operating procedures to get the highest productivity possible from your ultrasonic cleaner investment.