Commercial Ultrasonic Cleaner Elma X-tra basic 1200

Heavy-Duty Commercial Ultrasonic Cleaner for Production Lines

• Incredibly powerful cleaning
• Easy to operate, easy to maintain
• Dual-frequency 25/45 kHz operation
• Performance-enhancing permanent Sweep mode
• Comprehensive, custom cleaning cycle programming
• Rugged stainless steel tank and housing

	Sweep frequency: Continuous slight variation of ultrasonic frequency to eliminate hot spots, dead zones, and standing waves.		Drain: Drain with valve for easy removal of fluid from tank.
	Pulse mode: Produces intense bursts of ultrasonic power. Use to remove stubborn contaminants or degas solution rapidly.		LED display: Steady LED indicates set time and/or set temp. Flashing LED indicates remaining time and/or actual temp.
	Dual frequency: Can be switched between two different ultrasonic frequencies.		Safety auto-off: Ultrasonic power shuts off automatically after 12 hours of continuous operation.
	Heater: Thermostatically adjustable heater.

The heavy-duty industrial-scale Elma X-tra basic 1200 commercial ultrasonic cleaner is designed and constructed to provide years of reliable service on your production or parts cleaning line. Everything from its welded cavitation-resistant stainless steel tank to its programmable cleaning cycle control panel is aimed at solving the challenging cleaning tasks you face on a regular basis.

A commercial ultrasonic cleaner with built-in efficiencies

Time is money and the Elma X-tra basic 1200 Commercial Ultrasonic Cleaner will save you both. Degassing new solutions, for example, can take too much time especially when it involves 26 gallons of the stuff. Activate the Pulse mode on this beauty and compete the job in about 10 minutes, putting you into an operational mode far faster than similarly sized ultrasonic cleaners. And because you can heat the solution during degassing you save more time.

Then it’s simply a matter of setting time and temperature cleaning cycles matched to the cleaning job at hand. Functions and their status are indicated by LED displays with safety shutoffs to prevent damage from overheating or excessive untended operation. In fact, so intuitive is the control panel on this industrial ultrasonic cleaning machine you probably won’t need the instruction manual. But study it anyway.

Yes, accidents happen. If your control or generator components go bad, you can simply swap them out with a spare modular unit that auto-tunes to the transducers. You’re back in operation in a jiffy.

Other good things about the X-tra basic 1200 commercial ultrasonic cleaner

• Precision German construction
• A welded cavitation-resistant AISI Type 316 stainless steel tank with a 3-year warranty
• Attractively styled easily cleaned Type 321 stainless steel housing
• Roller mounts for easy moving
• Handy basket fixtures for cleaning and draining
• Side-mounted ball valve drain
• Slanted tank floor for fast drainage
• Comes with tank and operations manual
• Optional baskets, stainless steel lid, hinged flip-top sound-deadening cover

Questions? Contact the ultrasonic cleaning experts at iUltrasonic.

We’ll help you select the right sized ultrasonic cleaner, the correct biodegradable solution concentrates and operating procedures to get the highest productivity possible from your ultrasonic cleaner investment.